Brush Cutters

72" wide deck built with 7 gauge steel.

Twin 1/2" blades, 24 3/4" long and 3" wide.
The power is supplied by a Parker hydraulic direct drive motor with check value relief and allows machines without a high flow option to be compatible with 15 to 20 GPM. 
An Omni gear box turns the blades at around 1060 RPM's with 20 GPM flow, for a very efficient cut. 
The deck is equipped with a stump jumper between the blades and the deck, to help ride over obstacles like stumps.  

A safety chain in back, to limit the height your deck can be raised.


Copyright © 2018.JCT Attachments All rights reserved.